Earth Fault Loop Impedance (Zs)

Maximum Zs for an MCB and a check of the measured value

Design data
A
V
Ω
Settings & basis
ResultPreliminary · verify before design
Maximum Zs1.37 ΩLimit for the measured value: 1.09 Ω (80 % of maximum)
Within limitMeasured 0.85 Ω ≤ 1.09 Ω: disconnection in time
Instantaneous trip current Ia160 A
Prospective earth fault current (Uo ÷ Zs measured)271 A
Margin22 %

For final circuits in TN systems, 0.4 s disconnection at 230 V (IEC 60364-4-41). The 0.8 factor allows for conductors heating up during a fault (BS 7671 Appendix 3 rule of thumb). For fuses and other devices use the maker's or the standard's tables.

What to verify before design ↓

Verify before using in design

  • Measure Zs at the furthest point of each circuit with a calibrated tester; RCD-protected circuits may need a no-trip test mode.
  • For TT systems or long circuits where Zs is too high, add RCD protection as the standard allows.
  • Check the edition of each standard that your project specification calls for.
  • Confirm with manufacturer data and the approved design before construction.
Basis & methodVersion 1.0 · Nov 2026Basis last checked: Oct 2026✓ Tested against worked examples✓ Reviewed by an electrical engineer · Nov 2026

Formula

Zs max = Cmin × Uo ÷ Ia Ia = 5 / 10 / 20 × In (type B / C / D)

Standards and references

  • IEC 60364-4-41 (protection against electric shock)
  • IEC 60364-6 (verification)
  • BS 7671:2018+A3:2024, Table 41.3 and Appendix 3
  • IEC 60898-1 (MCB tripping characteristics)

Assumptions

  • TN system, final circuit, 0.4 s disconnection; MCB instantaneous trip at 5, 10 or 20 × In.

Inputs and units

Device—
Rated current InA
Voltage to earth UoV100–400
Measured ZsΩ0.01–20
Voltage factor Cmin0.9–1
Allow for conductor heating—

Typical range: last column

Worked example (default values)

  • DeviceMCB type B (Ia = 5 In)
  • Rated current In32 A
  • Voltage to earth Uo230 V
  • Measured Zs0.85 Ω
  • Voltage factor Cmin0.95
  • Allow for conductor heatingYes: measured ≤ 0.8 × Zs max
Maximum Zs1.37 ΩMeasured 0.85 Ω ≤ 1.09 Ω: disconnection in time

Next steps

More Electrical calculators

Found an error? Tell us

Describe the problem briefly (the wrong value, the right one, and the reference if you have it). The page name is sent automatically.