Slope & Gradient

Percent, degrees and 1:x ratio

Design data
m
m
ResultPreliminary · verify before design
Gradient2.00 %1 : 50.0
Angle1.15°
Length along slope25.00 m
What to verify before design ↓

Verify before using in design

  • Check limits in the local code, e.g. accessible ramps and car park ramps.
  • Check the edition of each standard that your project specification calls for.
  • Confirm with manufacturer data and the approved design before construction.
Basis & methodVersion 1.0 · Nov 2026Basis last checked: Oct 2026

Formula

Gradient = rise ÷ run × 100

Standards and references

  • Geometry

Assumptions

  • Straight uniform slope.

Inputs and units

Risem
Horizontal runm

Typical range: last column

Worked example (default values)

  • Rise0.5 m
  • Horizontal run25 m
Gradient2.00 %

Next steps

More Civil & Structural calculators

Found an error? Tell us

Describe the problem briefly (the wrong value, the right one, and the reference if you have it). The page name is sent automatically.