Steel Beam Selection

Lightest UB for bending, shear and deflection (common sizes)

Design data
m
kN/m
kN/m
Settings & basis
ResultPreliminary · verify before design
Lightest UB in this listUB 406×140×4646 kg/m · Wpl 888 cm³ · fy 355 MPa
ReviewNarrow flange (140 mm): lateral-torsional buckling is likely to govern unless the compression flange is fully restrained
Design moment MEd183.8 kN·m
Moment resistance Mc,Rd315.2 kN·m
Design shear VEd105.0 kN
Shear resistance Vc,Rd (Av ≈ h·tw)562 kN
Required Wpl at nominal fy518 cm³
Iy (estimated from Wpl)15,704 cm⁴
Deflection at service load19.0 mm
Deflection limit (span/360)19.4 mm
Utilisation (bending · shear)58 % · 19 %
Flange width · thickness140 · 11.2 mm

Picked by mass from 43 common UB sizes (BS 4-1, rounded) that pass bending, shear and deflection. Iy is estimated from Wpl (about ±3 %). Full lateral restraint assumed. Check lateral-torsional buckling, web bearing and connections, and confirm section data with the supplier's table.

What to verify before design ↓

Verify before using in design

  • Check deflection, lateral-torsional buckling, web bearing and connections.
  • Check the edition of each standard that your project specification calls for.
  • Confirm with manufacturer data and the approved design before construction.
Basis & methodVersion 1.1 · Nov 2026Basis last checked: Nov 2026✓ Tested against worked examples

Formula

M = wL² ÷ 8 Mc,Rd = Wpl · fy Vc,Rd = Av · fy ÷ √3 (EN 1993-1-1, γM0 = 1.0)

Standards and references

  • EN 1993-1-1:2005 (γM0 = 1.0)
  • UB section properties (BS 4-1)

Assumptions

  • Bending and shear only, class 1 or 2 section, full lateral restraint.
  • Yield strength reduced for flanges thicker than 16 mm (EN 10025-2).
  • Load entered is already factored.

Inputs and units

Spanm1–20
Factored UDLkN/m
Steel grade—
Service UDL (for deflection)kN/m
Deflection limit—

Typical range: last column

Worked example (default values)

  • Span7 m
  • Factored UDL30 kN/m
  • Steel gradeS355
  • Service UDL (for deflection)20 kN/m
  • Deflection limitSpan / 360
Lightest UB in this listUB 406×140×46Narrow flange (140 mm): lateral-torsional buckling is likely to govern unless the compression flange is fully restrained

Next steps

More Civil & Structural calculators

Found an error? Tell us

Describe the problem briefly (the wrong value, the right one, and the reference if you have it). The page name is sent automatically.