Formwork Area

Contact area for slabs, beams and columns

Design data
m
m
m
Settings & basis
ResultPreliminary · verify before design
Formwork area66.40 m²soffit + edges
Per element66.40 m²
Concrete volume12.00 m³

For beams, enter width as the beam width and depth as the beam depth below the slab.

What to verify before design ↓

Verify before using in design

  • Formwork and props need a temporary works design.
  • Check the edition of each standard that your project specification calls for.
  • Confirm with manufacturer data and the approved design before construction.
Basis & methodVersion 1.0 · Nov 2026Basis last checked: Oct 2026✓ Tested against worked examples

Formula

Slab: L×W + 2(L+W)×T Beam: L×(b + 2h) Column: 2(a+b)×H

Standards and references

  • Geometry (contact area)
  • BS 5975:2019 (temporary works)

Assumptions

  • Contact area only; no allowance for openings or edge forms.

Inputs and units

Element—
Lengthm
Widthm
Depth / heightm
Quantity

Typical range: last column

Worked example (default values)

  • ElementSlab
  • Length10 m
  • Width6 m
  • Depth / height0.2 m
  • Quantity1
Formwork area66.40 m²

Next steps

More Civil & Structural calculators

Found an error? Tell us

Describe the problem briefly (the wrong value, the right one, and the reference if you have it). The page name is sent automatically.