Simply Supported Beam

Moment, shear and deflection under UDL

Design data
m
kN/m
mm
mm
Settings & basis
ResultPreliminary · verify before design
Maximum bending moment110.3 kN·mAt mid-span
ReviewLong-term estimate 7.7 mm ≤ span/250 (24.0 mm): check to EN 1992 / ACI 318
Self-weight added4.50 kN/m
Total load24.50 kN/m
Maximum shear73.5 kN
Second moment of area5,400 × 10⁶ mm⁴
Elastic deflection (uncracked, short-term)2.55 mm
Long-term estimate (× 3.0, cracking + creep)7.7 mm
Allowable deflection24.0 mm

Gross rectangular section, no strength check. A cracked concrete beam under long-term load commonly deflects about 3–5 times the uncracked elastic value; the factor is a rough allowance, not a code calculation. Design to EN 1992-1-1 or ACI 318.

What to verify before design ↓

Verify before using in design

  • Cracked concrete deflects more; use the governing code method.
  • Design for factored loads and check shear, bearing and (steel) buckling.
  • Check the edition of each standard that your project specification calls for.
  • Confirm with manufacturer data and the approved design before construction.
Basis & methodVersion 1.1 · Nov 2026Basis last checked: Nov 2026✓ Tested against worked examples

Formula

M = wL² ÷ 8 δ = 5wL⁴ ÷ (384EI) δ long-term ≈ δ × factor

Standards and references

  • Elastic beam theory
  • EN 1992-1-1 / EN 1993-1-1 for design checks

Assumptions

  • Simply supported, uniform load, gross rectangular section, linear elastic.
  • Loads entered are the loads you want to check (service for deflection).

Inputs and units

Spanm1–30
Uniform loadkN/m
Section widthmm100–2000
Section depthmm150–3000
Material—
Deflection limit—
Add self-weight—
Concrete long-term factor

Typical range: last column

Worked example (default values)

  • Span6 m
  • Uniform load20 kN/m
  • Section width300 mm
  • Section depth600 mm
  • MaterialConcrete · 30 GPa
  • Deflection limitSpan / 250
  • Add self-weightYes
  • Concrete long-term factor3
Maximum bending moment110.3 kN·mLong-term estimate 7.7 mm ≤ span/250 (24.0 mm): check to EN 1992 / ACI 318

Next steps

More Civil & Structural calculators

Found an error? Tell us

Describe the problem briefly (the wrong value, the right one, and the reference if you have it). The page name is sent automatically.