Sustainability

Energy & Carbon in Gulf Buildings

In hot climates cooling dominates a building's energy use, so the envelope, the cooling plant and how the building is operated decide most of its energy and carbon. Measuring it properly is the first step to reducing it.

Where the energy goes

  • Cooling is usually the largest single use in Gulf buildings, followed by lighting, fans and pumps, and equipment.
  • The envelope sets the cooling load: shading, glazing performance (solar heat gain and U-value), insulation and air-tightness.
  • Efficient chillers or district cooling, variable-speed pumps and fans, and good controls reduce the rest.
  • Rooftop solar PV can offset part of the electricity where roofs and rules allow it.

Measuring performance

  • Energy use intensity (EUI) = annual energy ÷ floor area (kWh/m²·yr) lets you compare buildings and track a building over time.
  • Sub-metering by system (chillers, lighting, tenants) shows where to act; the BMS should log it.
  • Compare with benchmarks for the same building type and climate, using the definitions your rating system uses.

Carbon

  • Operational carbon = energy × emission factor; use the official grid factor for your country and year.
  • Embodied carbon comes from making and transporting materials: concrete (cement) and steel dominate in most buildings.
  • Environmental product declarations (EPDs) give embodied carbon per product; lower-carbon concrete mixes (with cement replacements) and efficient structural design cut it.
Good to knowMeter first, then argue. Most energy-saving debates end as soon as someone shows a month of sub-metered data.

Use with this guide

Found an error? Tell us

Describe the problem briefly (the wrong value, the right one, and the reference if you have it). The page name is sent automatically.