Energy Use Intensity & Carbon

Annual energy per m² and operational CO₂

Design data
kWh
kWh
m²
kgCO₂e/kWh
kWh/m²·yr
ResultPreliminary · verify before design
Energy use intensity220 kWh/m²·yr2,640,000 kWh over 12,000 m²
Within limit12 % below the benchmark
Operational CO₂ from electricity1,320 t/yr
CO₂ per m²110.0 kg/m²·yr
Energy per day (365 days)7,233 kWh

Benchmarks depend on building type, climate, hours and what is metered: use the one your rating system or client specifies. The grid emission factor here is only an example; take the official factor for your country and year. District cooling and gas need their own conversion and emission factors from the provider.

What to verify before design ↓

Verify before using in design

  • Use the official grid emission factor for your country and year.
  • Agree the benchmark and the floor-area definition with the client or rating body.
  • Check the edition of each standard that your project specification calls for.
  • Confirm with manufacturer data and the approved design before construction.
Basis & methodVersion 1.0 · Nov 2026Basis last checked: Oct 2026✓ Tested against worked examples

Formula

EUI = annual energy ÷ gross floor area CO₂ = electricity × grid emission factor

Standards and references

  • ISO 52000-1 (energy performance of buildings)
  • ASHRAE Standard 100 / 90.1
  • Rating system energy requirements (GSAS, Mostadam, LEED, Green Pyramid)
  • Official national grid emission factor

Assumptions

  • One year of metered energy; gross floor area as defined by the rating system.
  • CO₂ shown for electricity only.

Inputs and units

Annual electricity usekWh
Other energy, converted to kWh (cooling, gas)kWh
Gross floor aream²10–5000000
Grid emission factor (example value; use the official one)kgCO₂e/kWh0.05–1.2
Benchmark EUI to compare (project-defined)kWh/m²·yr

Typical range: last column

Worked example (default values)

  • Annual electricity use2640000 kWh
  • Other energy, converted to kWh (cooling, gas)0 kWh
  • Gross floor area12000 m²
  • Grid emission factor (example value; use the official one)0.5 kgCO₂e/kWh
  • Benchmark EUI to compare (project-defined)250 kWh/m²·yr
Energy use intensity220 kWh/m²·yr12 % below the benchmark

Next steps

Found an error? Tell us

Describe the problem briefly (the wrong value, the right one, and the reference if you have it). The page name is sent automatically.