Outrigger Pad Bearing

Ground pressure under a crane outrigger and pad size needed

Design data
t
m
m
kPa
ResultPreliminary · verify before design
Bearing pressure under the pad196 kPa441 kN on 2.25 m²
ReviewWithin 200 kPa allowable
Outrigger load441 kN
Pad area needed2.21 m²
Square pad side needed1.49 m
Utilisation of ground capacity98 %

Take the outrigger load from the crane maker's outrigger-load calculator for the actual lift, not the hook load. The pad must be stiff enough to spread the load over its full area; check buried services, voids, slopes and edges of excavations. Allowable pressure comes from a geotechnical assessment.

What to verify before design ↓

Verify before using in design

  • Get the allowable bearing pressure from a geotechnical assessment and check for services, voids and slopes.
  • Use the crane maker's outrigger-load calculator for the actual lift and slew range.
  • Check the edition of each standard that your project specification calls for.
  • Confirm with manufacturer data and the approved design before construction.
Basis & methodVersion 1.0 · Nov 2026Basis last checked: Oct 2026✓ Tested against worked examples

Formula

p = F ÷ (L × B) A needed = F ÷ q allowable

Standards and references

  • BS 7121-1 and CPA guidance on ground conditions for cranes
  • Crane maker's outrigger-load data

Assumptions

  • Uniform pressure under a stiff pad; vertical outrigger load only.

Inputs and units

Maximum outrigger loadt
Pad (mat) lengthm
Pad (mat) widthm
Allowable ground bearing pressurekPa50–1000

Typical range: last column

Worked example (default values)

  • Maximum outrigger load45 t
  • Pad (mat) length1.5 m
  • Pad (mat) width1.5 m
  • Allowable ground bearing pressure200 kPa
Bearing pressure under the pad196 kPaWithin 200 kPa allowable

Next steps

More Plant & temporary works calculators

Found an error? Tell us

Describe the problem briefly (the wrong value, the right one, and the reference if you have it). The page name is sent automatically.