Field Compaction Check

Dry density, relative compaction and moisture vs OMC

Design data
t/m³
%
t/m³
%
Settings & basis
ResultPreliminary · verify before design
Relative compaction95.2 %Dry density 2.000 t/m³ ÷ MDD 2.100 t/m³
Within limitPasses 95 % compaction
Field dry density2.000 t/m³
Dry density needed for the spec1.995 t/m³
Moisture minus OMC-0.5 %
Margin over the spec+0.2 %

Use the MDD and OMC from the same Proctor test the specification names (standard or modified) and from the same material source. Typical specs ask about 95 % for fill and subgrade and 98–100 % modified for sub-base and base; check yours.

What to verify before design ↓

Verify before using in design

  • Confirm the required percentage, Proctor type and test frequency in the specification.
  • Nuclear-gauge moisture can be off in saline or gypsum soils; check against oven-dry moisture.
  • Check the edition of each standard that your project specification calls for.
  • Confirm with manufacturer data and the approved design before construction.
Basis & methodVersion 1.0 · Nov 2026Basis last checked: Oct 2026✓ Tested against worked examples

Formula

ρd = ρwet ÷ (1 + w) Relative compaction = ρd ÷ MDD × 100

Standards and references

  • ASTM D1557 / AASHTO T 180 (modified Proctor)
  • ASTM D698 / AASHTO T 99 (standard Proctor)
  • ASTM D1556 (sand cone) · ASTM D6938 (nuclear gauge)
  • BS 1377-4 and BS 1377-9

Assumptions

  • Field wet density and moisture from a sand-cone or nuclear-gauge test on the same spot.
  • MDD and OMC from the laboratory Proctor test for the same material.

Inputs and units

Field wet (bulk) densityt/m³1.5–2.6
Field moisture content%1–25
Maximum dry density (lab)t/m³1.5–2.5
Optimum moisture content%3–25
Required compaction—
Moisture tolerance—

Typical range: last column

Worked example (default values)

  • Field wet (bulk) density2.15 t/m³
  • Field moisture content7.5 %
  • Maximum dry density (lab)2.1 t/m³
  • Optimum moisture content8 %
  • Required compaction95 % of MDD
  • Moisture toleranceOMC ± 2 %
Relative compaction95.2 %Passes 95 % compaction

Next steps

More Roads & pavements calculators

Found an error? Tell us

Describe the problem briefly (the wrong value, the right one, and the reference if you have it). The page name is sent automatically.