PoE Switch Budget

Power for cameras, phones and access points

Design data
W
ResultPreliminary · verify before design
Power needed (with 20 % margin)724 W603 W at full class power
ReviewWithin the 740 W budget but above 90 % of it, review
Ports used22
Budget remaining16 W

Class power at the switch is higher than at the device. Many devices draw less than their class: use datasheet maximums for final sizing.

What to verify before design ↓

Verify before using in design

  • Check per-port limits and the switch's total PoE budget in its datasheet.
  • Check the edition of each standard that your project specification calls for.
  • Confirm with manufacturer data and the approved design before construction.
Basis & methodVersion 1.0 · Nov 2026Basis last checked: Oct 2026✓ Reviewed by an electrical engineer · Nov 2026

Formula

Total = Σ devices × class power at the switch (PSE) × 1.2

Standards and references

  • IEEE 802.3af / 802.3at / 802.3bt-2018

Assumptions

  • Full class power at the switch (PSE) plus 20 % margin.

Inputs and units

PoE devices (15.4 W, 802.3af)
PoE+ devices (30 W, 802.3at)
PoE++ devices (60 W, 802.3bt)
Switch PoE budgetW

Typical range: last column

Worked example (default values)

  • PoE devices (15.4 W, 802.3af)8
  • PoE+ devices (30 W, 802.3at)12
  • PoE++ devices (60 W, 802.3bt)2
  • Switch PoE budget740 W
Power needed (with 20 % margin)724 WWithin the 740 W budget but above 90 % of it, review

Next steps

More ELV calculators

Found an error? Tell us

Describe the problem briefly (the wrong value, the right one, and the reference if you have it). The page name is sent automatically.