Lateral Earth Pressure

Active, at-rest and passive thrust on a wall

Design data
m
kN/m³
°
kPa
ResultPreliminary · verify before design
Active thrust Pa61.3 kN/mActs 1.48 m above the base
Ka · K0 · Kp0.333 · 0.500 · 3.00
At-rest thrust P0 (non-yielding wall)92.0 kN/m
Pressure at base (active)27.3 kPa
Overturning moment about base (active)90.7 kN·m/m

Rankine theory: vertical smooth wall, level dry backfill, no cohesion. Use at-rest pressure for propped basement walls. Add water pressure if the backfill is not drained.

What to verify before design ↓

Verify before using in design

  • Add water pressure if drainage cannot be guaranteed.
  • Compaction near the wall and sloping backfill increase pressure.
  • Check sliding, overturning and bearing for the wall.
  • Check the edition of each standard that your project specification calls for.
  • Confirm with manufacturer data and the approved design before construction.
Basis & methodVersion 1.0 · Nov 2026Basis last checked: Oct 2026✓ Tested against worked examples

Formula

Ka = tan²(45° − φ/2) K0 = 1 − sinφ Pa = ½·Ka·γ·H² + Ka·q·H

Standards and references

  • Rankine earth pressure theory
  • BS 8002:2015 (retaining structures)
  • EN 1997-1:2004, Section 9

Assumptions

  • Vertical smooth wall, horizontal drained backfill, no cohesion.
  • Uniform surcharge over the backfill.

Inputs and units

Retained height Hm1–12
Unit weight γkN/m³14–23
Friction angle φ′°20–40
Surcharge qkPa

Typical range: last column

Worked example (default values)

  • Retained height H4 m
  • Unit weight γ18 kN/m³
  • Friction angle φ′30 °
  • Surcharge q10 kPa
Active thrust Pa61.3 kN/m

Next steps

More Geotechnical calculators

Found an error? Tell us

Describe the problem briefly (the wrong value, the right one, and the reference if you have it). The page name is sent automatically.