Construction Waste & Diversion

Waste generated, share recycled and skips needed

Design data
m²
kg/m²
t
m³
t/m³
%
ResultPreliminary · verify before design
Diversion rate60 %600 t diverted of 1,000 t generated
Within limitMeets the 50 % target
Total waste generated1,000 t
Sent to landfill400 t
Skip loads for all waste167
Waste per m²50 kg/m²

Waste per m² varies widely with building type and method: use your own site records once available; the default is only an example. Count only tonnage backed by weighbridge or carrier tickets. Hazardous waste is tracked separately and never mixed into general skips.

What to verify before design ↓

Verify before using in design

  • Use weighbridge and carrier tickets for actual tonnages.
  • Confirm what counts as diversion in the rating system.
  • Check the edition of each standard that your project specification calls for.
  • Confirm with manufacturer data and the approved design before construction.
Basis & methodVersion 1.0 · Nov 2026Basis last checked: Oct 2026✓ Tested against worked examples

Formula

Total = area × waste per m² Diversion = diverted ÷ total Skips = total ÷ (skip volume × bulk density)

Standards and references

  • Rating system waste credits (GSAS, Mostadam, LEED)
  • Site waste management plan
  • Local waste regulations and licensed carriers

Assumptions

  • One waste factor for the whole building.
  • Diverted tonnage backed by tickets.

Inputs and units

Gross floor aream²
Waste generated per m² (project data or benchmark)kg/m²5–300
Waste recycled or reused (diverted)t
Skip sizem³
Loose bulk density of mixed wastet/m³0.1–2
Diversion target (rating system or client)%

Typical range: last column

Worked example (default values)

  • Gross floor area20000 m²
  • Waste generated per m² (project data or benchmark)50 kg/m²
  • Waste recycled or reused (diverted)600 t
  • Skip size12 m³
  • Loose bulk density of mixed waste0.5 t/m³
  • Diversion target (rating system or client)50 %
Diversion rate60 %Meets the 50 % target

Next steps

More Environmental calculators

Found an error? Tell us

Describe the problem briefly (the wrong value, the right one, and the reference if you have it). The page name is sent automatically.