Water & wastewater

Wastewater Treatment Basics

A treatment plant removes solids, organic matter and nutrients so the water can be discharged safely or reused. In the Gulf, most treated sewage effluent (TSE) is reused for irrigation and district cooling, so tertiary treatment is common.

Treatment stages

  • Preliminary: screens and grit removal protect pumps and tanks.
  • Primary: settlement tanks remove settleable solids.
  • Secondary: biological treatment (activated sludge, SBR, MBR) removes organic load (BOD) and often nitrogen.
  • Tertiary: filtration and disinfection (UV, chlorine) make TSE suitable for reuse; some plants add reverse osmosis.

Key parameters

  • BOD (biochemical oxygen demand) and COD: organic load.
  • TSS: total suspended solids.
  • Nitrogen and phosphorus: nutrients that cause algae.
  • Faecal indicator bacteria for reuse quality. Limits come from the environmental authority's permit.

Sludge and site issues

  • Sludge is thickened, digested or dried before disposal or reuse.
  • Odour control (covers and scrubbers) matters near homes.
  • Concrete tanks need protection against sulphate and H2S attack.
  • Commissioning a biological process takes weeks: seeding, building up biomass and proving effluent quality.

Typical treatment results (indicative)

ParameterRaw sewageAfter secondaryAfter tertiary
BOD (mg/L)200–400< 20–30< 10
TSS (mg/L)200–400< 30< 10
Use—Discharge (if permitted)Irrigation, cooling (as permitted)
Good to knowAsk for the effluent permit limits at the start. They decide the process, the tank sizes and how long commissioning will take.

Use with this guide

Found an error? Tell us

Describe the problem briefly (the wrong value, the right one, and the reference if you have it). The page name is sent automatically.