Geotechnical

Excavation Safety

Excavation collapses kill workers every year, often in trenches less than 2 m deep. Support, safe access and daily inspection save lives.

Before digging

  • Get a permit and confirm buried services with drawings, scanning and trial holes.
  • Use the temporary works design for slopes or support; never rely on 'the soil looks stable'.
  • Plan spoil and plant positions away from the edge.

Key rules (OSHA as an example; local rules may be stricter)

  • Protective systems (sloping, benching, shoring or trench boxes) for excavations 1.5 m (5 ft) deep or more, unless in stable rock.
  • Keep spoil and materials at least 0.6 m (2 ft) back from the edge.
  • Provide a ladder or ramp within 7.6 m (25 ft) of workers in trenches 1.2 m (4 ft) deep or more.
  • Daily inspection by a competent person, and after rain or any change.

Other hazards

  • Falls: edge protection and barriers around the excavation.
  • Atmosphere: test for oxygen and gases in deep or confined excavations.
  • Water ingress and undermining of nearby foundations or roads.
  • Plant: banksmen and stop blocks for vehicles near edges.
Good to knowIf anyone says 'it's only for a few minutes' about an unsupported trench, stop the work. Most trench deaths happen exactly then.

Use with this guide

Found an error? Tell us

Describe the problem briefly (the wrong value, the right one, and the reference if you have it). The page name is sent automatically.