Electrical

Earthing Systems: TN, TT, IT

The earthing system describes how the source and the exposed metal parts of an installation connect to earth. It decides how earth faults are cleared.

The letters

  • First letter: source. T = directly earthed, I = isolated or earthed through an impedance.
  • Second letter: exposed parts. T = connected to a local earth electrode, N = connected to the source neutral point.
  • After a dash: S = separate neutral and protective conductors, C = combined (PEN).

Where you meet each one

  • TN-S: separate PE all the way from the transformer. Common for buildings with their own substation.
  • TN-C-S: combined PEN from the utility, split into N and PE at the intake.
  • TT: consumer has its own earth electrode. Earth fault loop is high, so RCDs are essential.
  • IT: source not earthed. A first fault does not trip, so supply continues. Used in hospitals' operating theatres and some industrial processes, with insulation monitoring.
Good to knowCheck the earthing system before choosing protective devices: disconnection times and the need for RCDs depend on it.

Use with this guide

Found an error? Tell us

Describe the problem briefly (the wrong value, the right one, and the reference if you have it). The page name is sent automatically.