Safety KPIs: LTIFR & TRIR

Injury frequency rates per 1,000,000 or 200,000 hours worked

Design data
Settings & basis
ResultPreliminary · verify before design
LTIFR0.40Lost time injuries per 1,000,000 hours worked
ReviewInvestigate every LTI; compare rates only on the same base and definitions
Total recordable rate (TRIR / TRCF)1.60
LTIFR per 1,000,000 hours0.40
LTIFR per 200,000 hours0.08
Hours worked per lost time injury2,500,000

200,000 hours is about 100 full-time workers for a year (OSHA practice); many Gulf clients and IOGP report per 1,000,000 hours. Use the client's definitions of lost time injury and recordable case (fatality, lost time, restricted work, medical treatment), and the same hours basis (including subcontractors) in every report.

What to verify before design ↓

Verify before using in design

  • Confirm the base (200,000 or 1,000,000 hours) the client expects.
  • Classify each case with the HSE manager before reporting.
  • Check the edition of each standard that your project specification calls for.
  • Confirm with manufacturer data and the approved design before construction.
Basis & methodVersion 1.0 · Nov 2026Basis last checked: Oct 2026✓ Tested against worked examples

Formula

Rate = number of cases × base ÷ hours worked (base 1,000,000 or 200,000 hours)

Standards and references

  • OSHA recordkeeping (29 CFR 1904) for the 200,000-hour base
  • IOGP safety performance indicators (per 1,000,000 hours)
  • Client HSE reporting procedure

Assumptions

  • Hours include all workers on the project, subcontractors included.
  • Case definitions follow the client's procedure.

Inputs and units

Hours worked in the period (all workers)1000–1000000000
Lost time injuries (LTI)
Total recordable injuries (including LTIs)
Report rates—

Typical range: last column

Worked example (default values)

  • Hours worked in the period (all workers)2500000
  • Lost time injuries (LTI)1
  • Total recordable injuries (including LTIs)4
  • Report ratesPer 1,000,000 hours
LTIFR0.40Investigate every LTI; compare rates only on the same base and definitions

Next steps

Found an error? Tell us

Describe the problem briefly (the wrong value, the right one, and the reference if you have it). The page name is sent automatically.