Maintenance Manpower Estimate

Technicians needed for planned and reactive work

Design data
h
%
h
%
Settings & basis
ResultPreliminary · verify before design
Technicians needed6Workload 5.05 full-time technicians
Total maintenance hours per year7,800 h
Productive hours per technician1,546 h/year
From workload5.05

A first estimate for a contract or budget. Split it by trade (electrical, HVAC, plumbing, BMS), add supervisors and specialist subcontracts (lifts, fire, chillers), and check local labour law limits on working hours.

What to verify before design ↓

Verify before using in design

  • Split the result by trade and shift, and add supervisors, store keepers and helpdesk staff.
  • Check the edition of each standard that your project specification calls for.
  • Confirm with manufacturer data and the approved design before construction.
Basis & methodVersion 1.0 · Nov 2026Basis last checked: Nov 2026✓ Tested against worked examples

Formula

Technicians = PPM h × (1 + reactive %) ÷ (h/week × weeks × productive %) 24/7: 168 ÷ h/week × 52 ÷ weeks

Standards and references

  • EN 15341:2019 (maintenance KPIs, labour indicators)
  • Your country's labour law (working hours, rest days, overtime)

Assumptions

  • Productive (wrench) time leaves out travel, permits, briefings and paperwork; 60–75 % is common.
  • 24/7 cover assumes one technician on duty at all times, without overlap.

Inputs and units

Planned (PPM) hours per yearh100–200000
Reactive work allowance%10–60
Working hours per weekh40–60
Working weeks per year (after leave)40–50
Productive time (wrench time)%50–85
Cover needed—

Typical range: last column

Worked example (default values)

  • Planned (PPM) hours per year6000 h
  • Reactive work allowance30 %
  • Working hours per week48 h
  • Working weeks per year (after leave)46
  • Productive time (wrench time)70 %
  • Cover neededDay shift only
Technicians needed6

Next steps

More Facility management calculators

Found an error? Tell us

Describe the problem briefly (the wrong value, the right one, and the reference if you have it). The page name is sent automatically.