Maintenance Strategies: Planned, Reactive and Predictive
Not every asset needs the same care. A good maintenance plan mixes strategies according to how critical the asset is and how it fails.
The main strategies
- Reactive (run to failure): fix it when it breaks. Fine for cheap, non-critical items with no safety impact, such as a single light fitting.
- Planned preventive (PPM): tasks at fixed intervals or run hours, such as filter changes, greasing and generator load runs.
- Condition-based / predictive: act when measurements show a change: vibration on pumps and fans, thermography on panels, oil analysis on generators and transformers.
- Statutory: tasks the law or the authority requires at fixed intervals (fire alarm, fire pumps, lifts, pressure vessels, water hygiene). They are not optional.
How to choose
- Rank assets by criticality: safety, business impact, cost and time to repair.
- Critical assets with measurable wear (chillers, large pumps, generators, switchgear): add condition monitoring to PPM.
- Start PPM intervals from the maker's manual and the O&M manual, then adjust with your own failure records.
- Track the share of reactive work: if it stays high, the PPM plan is missing something.
Use with this guide
PPM Schedule & Compliance Tracker
PPM tasks by asset with next due date, overdue flags and monthly on-time compliance
- How to use
- PPM schedule
- PPM schedule (SAMPLE)
- Monthly compliance
- Monthly compliance (SAMPLE)