Hot Work
Hot work is any task producing flames, sparks or heat that could ignite materials: welding, cutting, brazing and grinding.
Before you start
- Get a hot work permit signed by the authorised person.
- Remove combustibles from the area, or cover them with fire blankets. NFPA 51B uses a 35 ft (about 11 m) radius.
- Check for flammable gases or vapours, especially near tanks, drains and fuel lines.
- Place a suitable fire extinguisher at the work point.
During and after
- A trained fire watch stays during the work and for a period after it stops, often at least 30 to 60 minutes.
- Shield nearby workers from sparks and arc flash with screens.
- Close the permit only after the final area check.