Site safety

Electrical Isolation (LOTO)

Lockout/tagout makes sure equipment cannot be energised while people work on it.

Safe isolation steps

  • Identify all energy sources, including back-feeds, UPS, generators and stored energy in capacitors.
  • Isolate with the correct isolating device.
  • Lock it with a personal padlock: one lock per worker.
  • Tag it with name, date and reason.
  • Prove dead with an approved voltage tester, proved on a known live source before and after the test.
  • For HV work, apply earths as required by the permit.
Good to knowTest before touch. Every conductor is live until you have proved it dead yourself.
Found an error? Tell us

Describe the problem briefly (the wrong value, the right one, and the reference if you have it). The page name is sent automatically.