ELV

Access Control Systems

Access control decides who can open which door and when, and keeps a log of every event. A door typically has a reader, a lock, a door contact and a request-to-exit device wired to a controller on the network.

Door components

  • Reader: card, PIN, mobile or biometric. Prefer secure credentials (e.g. MIFARE DESFire) over old 125 kHz proximity cards, which are easy to copy.
  • Controller: holds the access rights so doors keep working if the network drops. OSDP is the secure modern reader protocol; Wiegand is older and unencrypted.
  • Lock: electromagnetic lock (maglock), electric strike or motorised lock.
  • Door contact for door-forced and door-held-open alarms, REX button or sensor, and a green emergency door release at escape doors.

Fail-safe or fail-secure

  • Fail-safe: unlocks when power is lost. Required on escape routes so people can always get out.
  • Fail-secure: stays locked when power is lost. Used for stores, server rooms and perimeter doors that are not escape routes.
  • On a fire alarm, escape doors must release. This is wired from the fire alarm panel and must not depend on software alone.

Integration

  • Link door alarms to CCTV so the operator sees the camera view with the event.
  • Coordinate the door hardware schedule with the architect early: frame, lock and cable routes must be ready before doors are hung.
  • Provide battery backed power supplies sized for the locks and controllers.

Common lock types

LockBehaviour on power lossTypical use
Maglock (EM lock)Fail-safeGlass doors, escape routes
Electric strikeEither (selectable)Office doors, timber doors
Motorised lockEitherHigh security and fire doors
Electric boltUsually fail-safeFrameless glass doors
Good to knowCheck the fire strategy before choosing locks: a fail-secure lock on an escape door is a life safety issue, not a design preference.
Found an error? Tell us

Describe the problem briefly (the wrong value, the right one, and the reference if you have it). The page name is sent automatically.