Design & engineering

Power Systems & Protection Engineer

Runs power system studies (load flow, short circuit, relay coordination, arc flash) and specifies, sets and tests the protection that keeps substations and networks safe.

Career path

  1. 1
    Graduate power systems engineerData collection, single-line diagrams, first study models
  2. 2
    Protection / studies engineerShort-circuit and coordination studies, relay settings
  3. 3
    Senior protection engineerSubstation protection schemes, utility approvals, commissioning support
  4. 4
    Lead / principal engineerNetwork planning, study sign-off, team leadership

Core skills

ETAP / DIgSILENT PowerFactoryIEC 60909 short circuitRelay coordination (IEC 60255)IEC 61850 substation automationArc flash (IEEE 1584)Utility grid codes (KAHRAMAA, SEC, EETC)

Recommended certificates

CertificateIssued byWhen
ETAP training certificateETAP (Operation Technology, Inc.)Early career
NETA Certified Technician (Level II–IV)InterNational Electrical Testing Association (NETA)Mid-career
Professional Engineer (PE), Electrical & Computer: PowerNCEES (US)Senior
Chartered Engineer (CEng)IET (Engineering Council)Senior
Career tipLearn one study tool well and always check its results by hand on a simple case. Utilities trust engineers who can explain why a relay setting is what it is.

Interview questions

How do you check that protection is selective?

Plot the time–current curves of the upstream and downstream devices from the fault level down, check a grading margin (often 0.3–0.4 s for relays) at the maximum fault current, and confirm the downstream device clears first for every fault location.

Why does fault level matter when choosing switchgear?

The switchgear must withstand and break the prospective fault current. If the short-time and breaking ratings are below the calculated fault level, the equipment can fail violently during a fault.

What is IEC 61850 used for?

It is the standard for communication in substation automation: it defines data models and fast GOOSE messages so protection relays and controllers from different makers can exchange signals over Ethernet instead of hard wiring.

Check each certifying body's website for current eligibility and exam requirements.